View 74AVC9112DC_9139767.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

74avc9112 1-to-4 fan-out buffer rev. 1 23 april 2018 product data sheet 1 general description the 74avc9112 is a 1-to-4 fan-out buffer suitable for use in clock distribution. it has a data input (a), four data outputs (yn) and an output enable input (oe ). v cc can be supplied at any voltage between 0.8 v and 3.6 v. a high on oe causes all outputs to be pulled low via pull-down resistors, a low on oe disconnects the pull-down resistors and enables all outputs. schmitt trigger action at all inputs makes the circuit tolerant for slower input rise and fall time. the i off circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. 2 features and benefits ? wide supply voltage range: C v cc : 0.8 v to 3.6 v ? complies with jedec standards: C jesd8-12 (0.8 v to 1.3 v) C jesd8-11 (0.9 v to 1.65 v) C jesd8-7 (1.2 v to 1.95 v) C jesd8-5 (1.8 v to 2.7 v) C jesd8-b (2.7 v to 3.6 v) ? esd protection: C hbm ansi/esda/jedec js-001 class 3b exceeds 8 kv C cdm jesd22-c101 exceeds 1000 v ? maximum data rates: C 380 mbit/s (3.3 v) C 200 mbit/s (2.5 v) C 200 mbit/s (1.8 v) C 150 mbit/s (1.5 v) C 100 mbit/s (1.2 v) ? latch-up performance exceeds 100 ma per jesd 78 class ii ? inputs accept voltages up to 3.6 v ? specified from -40 c to +85 c and -40 c to +125 c downloaded from: http:///
nexperia 74avc9112 1-to-4 fan-out buffer 3 ordering information table 1.?ordering information package type number temperature range name description version 74AVC9112DC -40 c to +125 c vssop8 plastic very thin shrink small outline package; 8 leads; body width 2.3 mm sot765-1 74avc9112gt -40 c to +125 c xson8 plastic extremely thin small outline package; no leads; 8 terminals; body 1 x 1.95 x 0.5 mm sot833-1 4 marking table 2.?marking codes type number marking code 74AVC9112DC bb 74avc9112gt bb 5 functional diagram aaa-027818 y4 y3 r pd 87 a oe 23 r pd y2 y1 r pd 65 r pd figure 1.?logic symbol 74avc9112 all information provided in this document is subject to legal disclaimers. ? nexperia b.v. 2018. all rights reserved. product data sheet rev. 1 23 april 2018 2 / 16 downloaded from: http:///
nexperia 74avc9112 1-to-4 fan-out buffer 6 pinning information 6.1 pinning 74avc9112 v cc y4 a y3 oe y2 gnd y1 aaa-027820 1 2 3 4 6 5 8 7 figure 2.?pin configuration sot765-1 (vssop8) 74avc9112 y2 y3 y4 y1 oe a v cc gnd aaa-027819 3 6 2 7 1 8 4 5 transparent top view figure 3.?pin configuration sot833-1 (xson8) 6.2 pin description table 3.?pin description symbol pin description v cc 1 supply voltage a 2 data input oe 3 output enable input (active low) gnd 4 ground (0 v) y1, y2, y3, y4 5, 6, 7, 8 data outputs 7 functional description table 4.?function table [1] inputs output oe a yn l l l l h h h x l [1] h = high voltage level; l = low voltage level; x = dont care. 74avc9112 all information provided in this document is subject to legal disclaimers. ? nexperia b.v. 2018. all rights reserved. product data sheet rev. 1 23 april 2018 3 / 16 downloaded from: http:///
nexperia 74avc9112 1-to-4 fan-out buffer 8 limiting values table 5.?limiting values in accordance with the absolute maximum rating system (iec 60134). voltages are referenced to gnd (g round = 0 v). symbol parameter conditions min max unit v cc supply voltage -0.5 +4.6 v v i input voltage [1] -0.5 +4.6 v oe = low [1] [2] -0.5 v cc + 0.5 v v o output voltage oe = high [1] -0.5 +4.6 v i ik input clamping current v i < 0 v -50 - ma i ok output clamping current v o < 0 v -50 - ma i o output current v o = 0 v to v cc - 50 ma i cc supply current - 100 ma i gnd ground current -100 - ma t stg storage temperature -65 +150 c t amb = -40 c to +125 c sot765-1 package [3] - 250 mw p tot total power dissipation sot833-1 package [4] - 250 mw [1] the minimum input voltage ratings and output voltage ratings may be exceeded if the input and out put current ratings are observed. [2] v cc + 0.5 v should not exceed 4.6 v. [3] for sot765-1 package: above 99 c, the value of p tot derates linearly with 4.9 mw/k. [4] for sot833-1 package: above 68 c, the value of p tot derates linearly with 3.1 mw/k. 9 recommended operating conditions table 6.?recommended operating conditions symbol parameter conditions min max unit v cc supply voltage 0.8 3.6 v v i input voltage 0 3.6 v oe = low 0 v cc v v o output voltage oe = high 0 3.6 v t amb ambient temperature -40 +125 c t/v input transition rise and fall rate v cc = 0.8 v to 3.6 v 0 200 ns/v 74avc9112 all information provided in this document is subject to legal disclaimers. ? nexperia b.v. 2018. all rights reserved. product data sheet rev. 1 23 april 2018 4 / 16 downloaded from: http:///
nexperia 74avc9112 1-to-4 fan-out buffer 10 static characteristics table 7.?static characteristics at recommended operating conditions; voltages are referenced to gnd (ground = 0 v). t amb = 25 c symbol parameter conditions min typ max unit v i = v ih or v il v oh high-level output voltage i o = -1.5 ma; v cc = 0.8 v - 0.69 - v v i = v ih or v il v ol low-level output voltage i o = 1.5 ma; v cc = 0.8 v - 0.07 - v i i input leakage current a, oe input; v i = 0 v or 3.6 v; v cc = 0.8 v to 3.6 v - 0.025 0.25 a i off power-off leakage current v i or v o = 0 v to 3.6 v; v cc = 0 v - 0.1 1 a r pd pull-down resistance - 50 - k c i input capacitance a, oe input; v i = 0 v or 3.3 v; v cc = 3.3 v - 1.2 - pf c o output capacitance yn; v o = 3.3 v or 0 v; v cc = 3.3 v - 4.7 - pf table 8.?static characteristics at recommended operating conditions; voltages are referenced to gnd (ground = 0 v). t amb = -40 c to +85 c t amb = -40 c to +125 c symbol parameter conditions min max min max unit a, oe input v cc = 0.8 v 0.70v cc - 0.70v cc - v v cc = 1.1 v to 1.95 v 0.65v cc - 0.65v cc - v v cc = 2.3 v to 2.7 v 1.6 - 1.6 - v v ih high-level input voltage v cc = 3.0 v to 3.6 v 2 - 2 - v a, oe input v cc = 0.8 v - 0.30v cc - 0.30v cc v v cc = 1.1 v to 1.95 v - 0.35v cc - 0.35v cc v v cc = 2.3 v to 2.7 v - 0.7 - 0.7 v v il low-level input voltage v cc = 3.0 v to 3.6 v - 0.8 - 0.8 v v i = v ih or v il i o = -100 a; v cc = 0.8 v to 3.6 v v cc - 0.1 - v cc - 0.1 - v i o = -3 ma; v cc = 1.1 v 0.85 - 0.85 - v i o = -6 ma; v cc = 1.4 v 1.05 - 1.05 - v i o = -8 ma; v cc = 1.65 v 1.2 - 1.2 - v i o = -9 ma; v cc = 2.3 v 1.75 - 1.75 - v v oh high-level output voltage i o = -12 ma; v cc = 3.0 v 2.3 - 2.3 - v 74avc9112 all information provided in this document is subject to legal disclaimers. ? nexperia b.v. 2018. all rights reserved. product data sheet rev. 1 23 april 2018 5 / 16 downloaded from: http:///
nexperia 74avc9112 1-to-4 fan-out buffer t amb = -40 c to +85 c t amb = -40 c to +125 c symbol parameter conditions min max min max unit v i = v ih or v il i o = 100 a; v cc = 0.8 v to 3.6 v - 0.1 - 0.1 v i o = 3 ma; v cc = 1.1 v - 0.25 - 0.25 v i o = 6 ma; v cc = 1.4 v - 0.35 - 0.35 v i o = 8 ma; v cc = 1.65 v - 0.45 - 0.45 v i o = 9 ma; v cc = 2.3 v - 0.55 - 0.55 v v ol low-level output voltage i o = 12 ma; v cc = 3.0 v - 0.7 - 0.7 v i i input leakage current a, oe input; v i = 0 v or 3.6 v; v cc = 0.8 v to 3.6 v - 1 - 5 a i off power-off leakage current v i or v o = 0 v to 3.6 v; v cc = 0 v - 5 - 30 a i cc supply current v i = 0 v or v cc ; i o = 0 a; v cc = 0.8 v to 3.6 v - 8 - 50 a 11 dynamic characteristics table 9.?typical dynamic characteristics [1] voltages are referenced to gnd (ground = 0 v); for test circuit, see figure 6 ; for waveforms, see figure 4 and figure 5 . symbol parameter conditions t amb = 25 c; v cc = 0.8 v unit t pd propagation delay a to yn 31 ns t dis disable time oe to yn 25 ns t en enable time oe to yn 36 ns [1] t pd is the same as t plh and t phl ; t dis is the same as t plz and t phz ; t en is the same as t pzl and t pzh . 74avc9112 all information provided in this document is subject to legal disclaimers. ? nexperia b.v. 2018. all rights reserved. product data sheet rev. 1 23 april 2018 6 / 16 downloaded from: http:///
nexperia 74avc9112 1-to-4 fan-out buffer table 10.?dynamic characteristics [1] voltages are referenced to gnd (ground = 0 v); for test circuit, see figure 6 ; for waveforms, see figure 4 and figure 5 . v cc 1.2 v0.1 v 1.5 v0.1 v 1.8 v0.15 v 2.5 v0.2 v 3.3 v0.3 v symbol parameter conditions min max min max min max min max min max unit t amb = -40 c to +85 c t pd propagation delay a to yn 0.9 14.7 0.7 9.5 0.6 7.6 0.5 5.4 0.4 4.4 ns t dis disable time oe to yn 1.0 14.7 0.8 9.7 0.8 8.8 0.6 6.5 0.7 6.9 ns t en enable time oe to yn 1.0 15.8 0.7 9.9 0.6 7.9 0.5 5.5 0.5 4.5 ns t sk(o) output skew time between any output - 0.7 - 0.4 - 0.3 - 0.2 - 0.2 ns t amb = -40 c to +125 c t pd propagation delay a to yn 0.9 15.7 0.7 10.4 0.6 8.3 0.5 5.9 0.4 4.9 ns t dis disable time oe to yn 1.0 16.5 0.8 11.0 0.8 10.0 0.6 7.5 0.7 7.7 ns t en enable time oe to yn 1.0 16.9 0.7 10.9 0.6 8.7 0.6 6.1 0.5 4.9 ns t sk(o) output skew time between any output - 0.9 - 0.5 - 0.4 - 0.3 - 0.2 ns [1] t pd is the same as t plh and t phl ; t dis is the same as t plz and t phz ; t en is the same as t pzl and t pzh . table 11.?typical power dissipation capacitance at t amb = 25 c [1] [2] v cc symbol parameter conditions 0.8 v 1.2 v 1.5 v 1.8 v 2.5 v 3.3 v unit yn; outputs enabled 35 35 36 37 40 45 pf c pd power dissipation capacitance yn; outputs disabled 2.0 2.2 2.3 2.4 2.6 2.7 pf [1] c pd is used to determine the dynamic power dissipation (p d in w). p d = c pd v cc 2 f i + (c l v cc 2 f o ) where: f i = input frequency in mhz; f o = output frequency in mhz; c l = load capacitance in pf; v cc = supply voltage in v; (c l v cc 2 f o ) = sum of the outputs. [2] f i = 10 mhz; v i = gnd to v cc ; t r = t f = 1 ns; c l = 0 pf; r l = . 74avc9112 all information provided in this document is subject to legal disclaimers. ? nexperia b.v. 2018. all rights reserved. product data sheet rev. 1 23 april 2018 7 / 16 downloaded from: http:///
nexperia 74avc9112 1-to-4 fan-out buffer 11.1 waveforms and test circuit aaa-027817 yn output a input t phl t plh v m v m v i gnd v oh v ol v m v m measurement points are given in table 12 . v ol and v oh are typical output voltage levels that occur with the output load. figure 4.?the data input (a) to output (yn) propagation delay times aaa-019808 v i gnd v oh v ol v oh gnd oe input output low-to-off off-to-low output high-to-off off-to-high outputs enabled outputs disabled outputs enabled v x v y v m v m v m t plz t phz t pzl t pzh measurement points are given in table 12 . v ol and v oh are typical output voltage levels that occur with the output load. figure 5.?enable and disable times table 12.?measurement points supply voltage input output v cc v m v m v x v y 0.8 v to 1.6 v 0.5v cc 0.5v cc v ol + 0.1 v v oh - 0.1 v 1.65 v to 2.7 v 0.5v cc 0.5v cc v ol + 0.15 v v oh - 0.15 v 3.0 v to 3.6 v 0.5v cc 0.5v cc v ol + 0.3 v v oh - 0.3 v 74avc9112 all information provided in this document is subject to legal disclaimers. ? nexperia b.v. 2018. all rights reserved. product data sheet rev. 1 23 april 2018 8 / 16 downloaded from: http:///
nexperia 74avc9112 1-to-4 fan-out buffer v m v m t w t w 10 % 90 % 0 v v i v i negative pulse positive pulse 0 v v m v m 90 % 10 % t f t r t r t f 001aae331 v ext v cc v i v o dut c l r t r l r l g test data is given in table 13 r l = load resistance. c l = load capacitance including jig and probe capacitance. r t = termination resistance. v ext = external voltage for measuring switching times. figure 6.?test circuit for measuring switching times table 13.?test data supply voltage input load v ext v cc v i t/v [1] c l r l t plh , t phl t pzh , t phz t pzl , t plz 0.8 v to 1.6 v v cc 1.0 ns/v 15 pf 2 k open gnd 2v cc 1.65 v to 2.7 v v cc 1.0 ns/v 15 pf 2 k open gnd 2v cc 3.0 v to 3.6 v v cc 1.0 ns/v 15 pf 2 k open gnd 2v cc [1] dv/dt 1.0 v/ns 74avc9112 all information provided in this document is subject to legal disclaimers. ? nexperia b.v. 2018. all rights reserved. product data sheet rev. 1 23 april 2018 9 / 16 downloaded from: http:///
nexperia 74avc9112 1-to-4 fan-out buffer 11.2 typical propagation delay characteristics c l (pf) 0 60 48 24 36 12 aaa-019810 12 18 6 24 30 t pd (ns) 0 (1)(2) (3) (4) (5) (6) (1) v cc = 0.8 v (2) v cc = 1.2 v (3) v cc = 1.5 v (4) v cc = 1.8 v (5) v cc = 2.5 v (6) v cc = 3.3 v figure 7.?typical propagation delay versus load capacitance; t amb = 25 c 74avc9112 all information provided in this document is subject to legal disclaimers. ? nexperia b.v. 2018. all rights reserved. product data sheet rev. 1 23 april 2018 10 / 16 downloaded from: http:///
nexperia 74avc9112 1-to-4 fan-out buffer 12 package outline references outline version european projection issue date iec jedec jeita sot765-1 mo-187 sot765-1_po 07-06-0216-05-31 unit mm max nom min 0.15 0.27 0.23 2.1 0.5 0.4 a max. dimensions (mm are the original dimensions) note 1. plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. plastic or metal protrusions of 0.25 mm maximum per side are not included. vssop8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm sot765-1 a 1 a 2 0.85 a 3 b p c d (1) e (2) e h e l 0.4 l p q v w 1 0.12 0.1 0.2 0.08 y z (1) 3.0 0.15 2.2 0.19 0.00 0.17 0.08 1.9 0.1 0.60 0 3.2 0.40 2.4 0.21 8 0 scale 5 mm detail x a y e x v a b p w d z 1 4 8 5 a 2 a 1 q l p (a 3 ) a l h e e c pin 1 index figure 8.?package outline sot765-1 (vssop8) 74avc9112 all information provided in this document is subject to legal disclaimers. ? nexperia b.v. 2018. all rights reserved. product data sheet rev. 1 23 april 2018 11 / 16 downloaded from: http:///
nexperia 74avc9112 1-to-4 fan-out buffer terminal 1 index area references outline version european projection issue date iec jedec jeita sot833-1 - - - mo-252 - - - sot833-1 07-11-14 07-12-07 dimensions (mm are the original dimensions) xson8: plastic extremely thin small outline package ; no leads; 8 terminals; body 1 x 1.95 x 0.5 mm d e e 1 e a 1 b l l 1 e 1 e 1 0 1 2 mm scale notes 1. including plating thickness. 2. can be visible in some manufacturing processes. unit mm 0.25 0.17 2.0 1.9 0.35 0.27 a 1 max b e 1.05 0.95 d e e 1 l 0.40 0.32 l 1 0.5 0.6 a (1) max 0.5 0.04 1 8 2 7 3 6 4 5 8 (2) 4 (2) a figure 9.?package outline sot833-1 (xson8) 74avc9112 all information provided in this document is subject to legal disclaimers. ? nexperia b.v. 2018. all rights reserved. product data sheet rev. 1 23 april 2018 12 / 16 downloaded from: http:///
nexperia 74avc9112 1-to-4 fan-out buffer 13 abbreviations table 14.?abbreviations acronym description cdm charged device model dut device under test esd electrostatic discharge hbm human body model 14 revision history table 15.?revision history document id release date data sheet status change notice supersedes 74avc9112 v.1 20180423 product data sheet - - 74avc9112 all information provided in this document is subject to legal disclaimers. ? nexperia b.v. 2018. all rights reserved. product data sheet rev. 1 23 april 2018 13 / 16 downloaded from: http:///
nexperia 74avc9112 1-to-4 fan-out buffer 15 legal information 15.1 data sheet status document status [1][2] product status [3] definition objective [short] data sheet development this document contains data from the objective specification for product development. preliminary [short] data sheet qualification this document contains data from the preliminary specification. product [short] data sheet production this document contains the product specification. [1] please consult the most recently issued document before initiating or completing a design. [2] the term 'short data sheet' is explained in section "definitions". [3] the product status of device(s) described in this document may have changed since this document w as published and may differ in case of multiple devices. the latest product status information is available on the internet at url http://www.nexper ia.com . 15.2 definitions draft the document is a draft version only. the content is still under internal review and subject to formal approval, which may result in modifications or additions. nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. short data sheet a short data sheet is an extract from a full data sheet with the same product type number(s) and title. a short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. for detailed and full information see the relevant full data sheet, which is available on request via the local nexperia sales office. in case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. product specification the information and data provided in a product data sheet shall define the specification of the product as agreed between nexperia and its customer, unless nexperia and customer have explicitly agreed otherwise in writing. in no event however, shall an agreement be valid in which the nexperia product is deemed to offer functions and qualities beyond those described in the product data sheet. 15.3 disclaimers limited warranty and liability information in this document is believed to be accurate and reliable. however, nexperia does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. nexperia takes no responsibility for the content in this document if provided by an information source outside of nexperia. in no event shall nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. notwithstanding any damages that customer might incur for any reason whatsoever, nexperia's aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the terms and conditions of commercial sale of nexperia. right to make changes nexperia reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. this document supersedes and replaces all information supplied prior to the publication hereof. suitability for use nexperia products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an nexperia product can reasonably be expected to result in personal injury, death or severe property or environmental damage. nexperia and its suppliers accept no liability for inclusion and/or use of nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customers own risk. applications applications that are described herein for any of these products are for illustrative purposes only. nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. customers are responsible for the design and operation of their applications and products using nexperia products, and nexperia accepts no liability for any assistance with applications or customer product design. it is customers sole responsibility to determine whether the nexperia product is suitable and fit for the customers applications and products planned, as well as for the planned application and use of customers third party customer(s). customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. nexperia does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customers applications or products, or the application or use by customers third party customer(s). customer is responsible for doing all necessary testing for the customers applications and products using nexperia products in order to avoid a default of the applications and the products or of the application or use by customers third party customer(s). nexperia does not accept any liability in this respect. limiting values stress above one or more limiting values (as defined in the absolute maximum ratings system of iec 60134) will cause permanent damage to the device. limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the recommended operating conditions section (if present) or the characteristics sections of this document is not warranted. constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. terms and conditions of commercial sale nexperia products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nexperia.com/profile/terms, unless otherwise agreed in a valid written individual agreement. in case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. nexperia hereby expressly objects to applying the customers general terms and conditions with regard to the purchase of nexperia products by customer. no offer to sell or license nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. export control this document as well as the item(s) described herein may be subject to export control regulations. export might require a prior authorization from competent authorities. 74avc9112 all information provided in this document is subject to legal disclaimers. ? nexperia b.v. 2018. all rights reserved. product data sheet rev. 1 23 april 2018 14 / 16 downloaded from: http:///
nexperia 74avc9112 1-to-4 fan-out buffer non-automotive qualified products unless this data sheet expressly states that this specific nexperia product is automotive qualified, the product is not suitable for automotive use. it is neither qualified nor tested in accordance with automotive testing or application requirements. nexperia accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. in the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without nexperia's warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond nexperia's specifications such use shall be solely at customers own risk, and (c) customer fully indemnifies nexperia for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond nexperia's standard warranty and nexperia's product specifications. translations a non-english (translated) version of a document is for reference only. the english version shall prevail in case of any discrepancy between the translated and english versions. 15.4 trademarks notice: all referenced brands, product names, service names and trademarks are the property of their respective owners. 74avc9112 all information provided in this document is subject to legal disclaimers. ? nexperia b.v. 2018. all rights reserved. product data sheet rev. 1 23 april 2018 15 / 16 downloaded from: http:///
nexperia 74avc9112 1-to-4 fan-out buffer contents 1 general description ....................................... ..... 1 2 features and benefits ........................................ .1 3 ordering information ..................................... ..... 2 4 marking .............................................. ...................2 5 functional diagram ...................................... ....... 2 6 pinning information ................................... ......... 3 6.1 pinning ............................................... ................ 3 6.2 pin description ............................................. ...... 3 7 functional description ................................... .....3 8 limiting values ........................................ ............ 4 9 recommended operating conditions ................ 4 10 static characteristics .......................................... 5 11 dynamic characteristics .....................................6 11.1 waveforms and test circuit ................................ 8 11.2 typical propagation delay characteristics ........ 10 12 package outline ......................................... ........11 13 abbreviations ........................................... ......... 13 14 revision history ......................................... ....... 13 15 legal information ....................................... ....... 14 please be aware that important notices concerning this document and the product(s) described herein, have been included in section 'legal information'. ? nexperia b.v. 2018. all rights reserved. for more information, please visit: http://www.nexperia.com for sales office addresses, please send an email to: salesaddresses@nexperia.com date of release: 23 april 2018 document identifier: 74avc9112 downloaded from: http:///

▲Up To Search▲

Price & Availability of 74AVC9112DC

	To Download 74AVC9112DC Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .